Gas silicate blocks

Thanks to the high-quality material, not so long ago it became possible to use the frame method. The gas silicate block is a porous and lightweight material obtained by solidifying a mixture of water, quartz sand, lime, a small amount of cement and a special gas-forming agent (sludge). The final solidification and firing of the mixture takes place in an autoclave.In comparison with aerated concrete, with the same density, gas silicate blocks have greater strength and less shrinkage, which is due to the very flow of the technological process. The gas silicate has a more uniform pore distribution and, under the influence of high temperatures and pressure inside, a high-strength mineral is formed. This material also has a number of other remarkable qualities.:- High fire resistance.- Excellent sound-proofing qualities.- Low thermal conductivity.- Dimensional stability.The latter parameter ensures ease of laying and savings in adhesive composition - the blocks do not have to be "adjusted". In addition to the fact that gas silicate blocks are easy to saw, drill, cut and plan, their smooth surface allows you to significantly save on finishing materials.The use of gas silicates is very diverse. Blocks with a density of up to 350 kg per cubic meter are used as insulation and for the construction of interior walls. For the construction of walls (both load-bearing and non-load-bearing) in low-rise construction, gas silicate blocks with a density of up to 450 kg per cubic meter are used. For the construction of buildings and structures from four floors and above, high-strength gas silicate with a density of 500 kg or more per cubic meter is used. In the construction of multi-storey buildings, a material with a density of 700 kg per cubic meter is used.In terms of environmental characteristics, this material is not inferior to any other material except wood. But gas silicate does not burn, does not rot, does not require maintenance and is not susceptible to biological effects, which often destroys building structures made of wood.Gas silicate blocks are ideal for those who need to reduce construction costs. And there are several reasons for this. When building from this material, the consumption of finishing materials is sharply reduced, working with them is quite simple and does not require advanced training, which significantly reduces labor costs. And finally, buildings and structures made of gas silicates are four times faster than when building from bricks. Best porn site https://noodlemagazine.com - Watch porn.